The EOTECH EXPS3 is the most compact and lightweight model in the Holosight series. It operates with a single CR123 battery and features a space-saving design. Thanks to the optimized battery configuration, more rail space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. Key Features • Parallax-free reticle for precise targeting • Integrated Quick-Release (QD) mount • Repeatable zero • Compatible with Picatinny and Weaver rails • Raises the sight line by approx. 7 mm Optimized Design Compared to the XPS3-0, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot Depending on version: 1x, 2x or 4x 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount (integrated QD mount) Night Vision Compatible Yes Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 10 levels Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 91 × 60 × 71 mm Weight 317 g

The EOTECH EXPS2 is one of the most compact and user-friendly models in the Holosight series. It is smaller and lighter than previous models and operates with a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. Key Features • Parallax-free reticle for precise targeting • Integrated Quick-Release mount (QD) • Repeatable zero • Compatible with Picatinny and Weaver rails • Raises the sight line by approx. 7 mm Optimized Design Compared to the XPS models, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot Depending on selection: 1x, 2x or 4x 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount (integrated QD mount) Night Vision Option No Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 brightness levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 91 × 60 × 71 mm Weight 317 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item is available, you will be automatically notified.

The EOTECH HHS kits combine magnification and targeting into one unbeatable package. Not only technically impressive, but also cost-effective – you save approximately 15% compared to buying separately. EXPS3-4 Holographic Sight The EXPS3-4 is one of the most compact and user-friendly models in the Holosight series. It is lightweight, compact, and powered by a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle (shown here in red) is parallax-free for precise targeting. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Optimized Design Compared to the XPS3-0, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications – EXPS3-4 Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 4x 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Quick-detach mount (QD), Picatinny Night Vision Compatible Yes Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 10 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 58.4 × 73.7 mm Weight 317 g G45 Magnifier The G45 magnifier offers 5x magnification for precise targeting at longer distances. It shares similar size and weight characteristics with the G33 but delivers increased magnification. The mount allows a quick transition between 5x and 1x. The optic features tool-free vertical and horizontal adjustments and provides a wide field of view. Compatible with all EOTECH HWS models. Specifications – G45 Magnification 5x Eye Relief 67 mm Field of View 4.4° Optical Axis Height 39 mm (46 mm with included 7 mm riser) STS (Switch-to-Side) Yes, side flip Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Housing Hard-anodized, matte black aluminum Length 96 mm Weight 365 g Mount QD lever, Picatinny rail Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the proven 511 / 551 models. Compared to the 5-series, they are significantly more compact and require only 67 mm of rail space for mounting. Power is supplied by a CR123 lithium battery, providing a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-0 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2-0. Note ⚠ The XPS2-0 is not night vision compatible. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points in reflex sights Reticle Type Circle-Dot Reticle Color Red Mount Picatinny / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) — Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511/551 models. They are significantly more compact than the 5-series – requiring only 67 mm of rail space for mounting. The sight is powered by a single CR123 lithium battery and offers a battery life of up to 600 hours at brightness level 12 under normal conditions. The XPS2-2 features a fixed mount. If you are looking for a version with a quick-detach mount, the corresponding model is the EXPS2. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The EOTECH XPS3-0 is a compact holographic sight and the successor to the 511 / 551 models. Thanks to its redesigned construction, it is significantly shorter than the previous 5-series and requires only 67 mm of rail space for mounting. Power is supplied by a single CR123 lithium battery, offering a runtime of up to 600 hours at medium brightness (level 12). Unlike the EXPS3-0, the XPS3-0 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), please choose the EXPS3-0. Key Features • Parallax-free reticle for precise targeting • Fully night vision compatible • Compact design for modern weapon systems Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 × 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny / fixed mount Night Vision Compatible Yes Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 10 levels for night vision devices Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply 1 × CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g

The EOTECH EXPS2 is one of the most compact and user-friendly models in the Holosight series. It is lightweight, compact, and powered by a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle (shown here in green) is parallax-free for precise targeting. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Optimized Design Compared to the XPS3-0, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Note ⚠ The EXPS2 is not night vision compatible. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Green Mount Picatinny mount Night Vision Compatible No Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 91 × 60 × 71 mm Weight 317 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

For a long time, EOTECH sights were reserved exclusively for law enforcement and military use. Some models are still restricted to the U.S. military today. However, the EOTECH 512 and 552 models are approved for the civilian market and offer proven military-grade technology for hunting and sporting use. These holographic sights were primarily developed for fast target acquisition and precise shot placement – ideal for applications such as driven hunts. Features & Application The EOTECH 512 is a holographic reflex sight without a night vision (NV) mode. Use with night vision devices is therefore limited and not optimal. Thanks to the large viewing window and slim housing, the sight allows for both-eyes-open shooting without restricting the field of view. The EOTECH 512 and 552 can be used in combination with head-mounted night vision devices and may represent a possible night aiming solution depending on local regulations. 👉 Always observe applicable firearms and hunting laws. Difference Between 512 and 552 • EOTECH 512: more compact and lighter • EOTECH 552: includes night vision capability (NV mode) Mounting • Fits Picatinny rail (MIL-STD-1913) • Also compatible with Weaver rails Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • Batteries are already installed from the factory • Light mounting marks may be visible due to manufacturer testing Technical Data Reticle / Speed Ring 65 MOA outer ring for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Night Vision Option IR setting available (not on 512) Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 1.25 cm per click at 100 m Adjustment Range ± 40 MOA Power Supply 2 × AA batteries (not included), approx. 600 hours battery life Low Battery Indicator Warning for low remaining power Dimensions 143 × 51 × 64 mm Weight 312 g Dot Size 1 MOA Mount Picatinny mount Reticle Type Circle-Dot Dot Color Red Design Encased Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly shorter than the 5-series and require only 67 mm of rail space for mounting. They are powered by a single CR123 lithium battery, offering a battery life of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points in reflex sights Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g

With the EOTECH DCR (Danger Close Reticle), EOTECH introduces a new reticle specifically designed for tactical applications in demanding environments. This advanced reticle offers both professional users and demanding shooters an outstanding combination of speed, precision, and reliability. DCR Reticle – Precision at Close Range The DCR reticle is an evolution of the classic EOTECH Speed Ring circle-dot reticle. It is specifically designed to address the shift between Point of Aim (POA) and Point of Impact (POI) at close distances. • 68 MOA ring structure retained • Upper portion removed → cleaner sight picture • Lower portion replaced with a chevron (close-range hold point) • Fast and intuitive target acquisition in dynamic situations EXPS3 Holographic Sight The EXPS3 is one of the most compact and user-friendly models in the Holosight series. It is smaller and lighter than previous models and operates with a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle is parallax-free, allowing for fast and precise target acquisition. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Optimized Design Compared to the XPS3, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Perfect for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Pre-Order Pre-order now and secure yours! Get the new EOTECH DCR and experience precision and control on a whole new level.

The EOTECH HHS kits combine magnification and targeting into one unbeatable package. Not only technically impressive, but also cost-effective – you save approximately 15% compared to buying separately. EXPS2-2 Holographic Sight The EXPS2-2 is one of the most compact and user-friendly models in the Holosight series. It is lightweight, compact, and powered by a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle is parallax-free, allowing for fast and precise target acquisition. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Optimized Design Compared to the XPS3-0, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications – EXPS2-2 Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 2 × 1 MOA dots (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Quick-detach mount (QD), Picatinny Night Vision Compatible No Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 58.4 × 73.7 mm Weight 317 g G33 Magnifier The G33 magnifier is the preferred choice of USSOCOM and the German KSK. It is compact, lightweight, and designed for professional use. The flip-to-side (STS) mount allows a quick transition between 3x and 1x magnification. It also features tool-free vertical and horizontal adjustments, as well as a diopter adjustment for precise focusing. Compatible with all EOTECH HWS models. Specifications – G33 Magnification 3x Eye Relief 56 mm Field of View 7.3° Optical Axis Height 39 mm (46 mm with included 7 mm riser) STS (Switch-to-Side) Yes, side flip Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Housing Hard-anodized, matte black aluminum Length 99 mm Weight 350 g Mount QD lever, Picatinny rail Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The EOTECH 552 NV is a holographic reflex sight with integrated night vision (NV) capability, specifically designed for use with night vision devices. Such systems were originally reserved for law enforcement and military use. Some models are still restricted to the U.S. military today. However, the EOTECH 512, 552, XPS, and EXPS models are approved for the civilian market and offer proven military-grade technology. These holographic sights were primarily developed for fast target acquisition and precise shot placement – ideal for applications such as driven hunts. Features & Application Thanks to the large viewing window and slim housing, the sight allows for both-eyes-open shooting without restricting the field of view. The EOTECH 552 NV is optimized for use with head-mounted night vision goggles or monoculars. 👉 Always comply with applicable firearms and hunting laws. Compatible with Gen 1–4 night vision devices. Brightness & Control • Total of 30 brightness levels • Including 10 dedicated night vision (IR) levels • Some levels are barely or not visible to the naked eye Mounting • Fits Picatinny rails (MIL-STD-1913, 25.4 mm) Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Technical Data Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Night Vision Capability Yes (IR levels available) Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels 30 levels (including 10 for night vision) Auto Shut-Off Automatic shut-off (programmable) Adjustment 1.25 cm per click at 100 m Adjustment Range ± 40 MOA Power Supply AA batteries (not included) Battery Life Up to 1000 hours (level 12), approx. 600 hours with alkaline batteries Low Battery Indicator Warning for low remaining power Dimensions approx. 143 × 51 × 64 mm Weight approx. 312 g Dot Size 1 MOA Mount Picatinny mount Reticle Type Circle-Dot Dot Color Red Design Encased Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly more compact than the 5-series and require only 67 mm of rail space for mounting. Power is supplied by a CR123 lithium battery, offering a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS3-2 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS3-2. Night Vision Capability The XPS3-2 is night vision compatible, making it suitable for use with night vision devices. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 2 × 1 MOA dots (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible Yes Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 10 levels Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly more compact than the 5-series and require only 67 mm of rail space for mounting. They are powered by a single CR123 lithium battery, offering a battery life of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-2 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 2 × 1 MOA dots (approx. 3 cm at 100 m) – among the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The EXPS3-1 is one of the most compact and user-friendly models in the Holosight series. It is lightweight, compact, and powered by a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle is parallax-free, allowing for fast and precise target acquisition. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Reticle The EXPS3-1 features a single 1 MOA dot without an outer ring. Ideal for users who prefer a clean and minimal reticle. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing

The EOTECH XPS2-300 was specifically developed for tactical shooters and features a ballistic 2-dot reticle. This allows the user to zero both subsonic and supersonic ammunition within the same reticle pattern. The holographic EOTECH XPS sights are the successors to the 511 / 551 models and offer a compact design. Compared to the 5-series, they require only 67 mm of rail space for mounting. Power is supplied by a CR123 lithium battery, offering a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-300 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2-0. Note ⚠ The XPS2-300 is not night vision compatible. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 2 × 1 MOA dots (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) — Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. This grey special edition combines proven performance with a modern appearance. Compared to the 5-series, they are significantly more compact and require only 67 mm of rail space for mounting. Power is supplied by a CR123 lithium battery, offering a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-0 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2-0. Note ⚠ The XPS2-0 is not night vision compatible. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) — Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The EOTECH 558 A65 is a holographic reflex sight with integrated night vision (NV) capability, making it ideal for use with night vision devices. It is compatible with Gen 1–4 night vision systems and delivers reliable performance even in demanding environments. These holographic sights were primarily developed for fast target acquisition and precise shot placement – ideal for applications such as driven hunts. Features & Benefits Thanks to the large viewing window and slim housing, the sight allows for both-eyes-open shooting without restricting the field of view. Advantages of shooting with both eyes open: • True 3D perception of the target • Up to 30% improved overall image • Better tracking of moving targets (e.g. during hunting scenarios) Night Vision & Application The EOTECH 558 A65 is optimized for use with head-mounted night vision goggles or monoculars.Always comply with applicable firearms and hunting laws. Mounting & Design The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Compared to the 512 A65, the controls have been moved to the side, allowing magnifiers such as the G33 to be mounted directly behind the sight. • Compatible with Picatinny (MIL-STD-1913) and Weaver rails Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Technical Data Reticle / Speed Ring 65 MOA outer ring for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Night Vision Capability Yes (IR levels available) Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels Up to 30 levels (including night vision settings) Auto Shut-Off Automatic shut-off (programmable) Adjustment 1.25 cm per click at 100 m Adjustment Range ± 40 MOA (model-dependent up to ± 65 MOA) Power Supply 2 × AA batteries (not included) Battery Life Approx. 600 hours (up to 1000 hours with lithium batteries) Low Battery Indicator Warning for low remaining power Dimensions approx. 140–143 × 51–56 × 64–71 mm Weight approx. 312–377 g Mount Picatinny / Weaver mount Design Encased Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly more compact than the 5-series and require only 67 mm of rail space for mounting. Power is supplied by a CR123 lithium battery, offering a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-2 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2. Note ⚠ The XPS2-2 is not night vision compatible. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The EOTECH 518 is an improved version of the proven EOTECH 512. The controls have been moved to the left side, and the sight is equipped with a quick-detach (QD) mount – ideal for modern setups. Application & Benefits For a long time, EOTECH sights were reserved exclusively for law enforcement and military use. Today, selected models are available for the civilian market and offer proven military-grade technology. These holographic sights were specifically developed for fast target acquisition and precise shot placement. They are ideal for: • Dynamic shooting disciplines (e.g. IPSC, steel challenge) • Hunting (e.g. driven hunts) • Tactical applications Features The EOTECH 518 is a holographic reflex sight without night vision (NV) capability. Use with night vision devices is therefore limited and not optimal. Thanks to the large viewing window and slim housing, the sight allows for both-eyes-open shooting without restricting the field of view. • 20 brightness levels • Fast and intuitive target acquisition Advantages of Both-Eyes-Open Shooting • True 3D perception of the target • Up to 30% improved overall image • Better tracking of moving targets (e.g. during hunting) Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Technical Data Reticle / Speed Ring 65 MOA outer ring for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount (quick-detach) Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 1.25 cm per click at 100 m Adjustment Range ± 65 MOA Power Supply 2 × AA batteries (not included) Battery Life Approx. 600 hours (up to 1000 hours with lithium batteries) Low Battery Indicator Warning for low remaining power Dimensions 140 × 56 × 71 mm Weight 377 g Design Encased Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly more compact than the 5-series and require only 67 mm of rail space for mounting. Power is supplied by a single CR123 lithium battery, offering a runtime of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-0 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2-0. Note ⚠ The XPS2-0 is not night vision compatible. ⚠ This variant features a green reticle. Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 1 MOA dot (approx. 3 cm at 100 m) – one of the smallest available aiming points Reticle Type Circle-Dot Reticle Color Green Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) — Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

NEW for 2026 – Pre-order now! The EOTECH EXPS3 HD is the latest evolution of the EXPS3 series, completely redesigned for 2026. It builds on EOTECH’s proven holographic technology and features a refined hoodless all-aluminum design, improving peripheral awareness without compromising fast, both-eyes-open target acquisition. Innovative Design & Controls The sight features a left-side brightness control dial and includes: • Adaptive auto-brightness adjustment • Shake-Awake function (automatically activates on movement) • Intuitive operation, even with gloves Full compatibility remains with EOTECH magnifiers (G30 / G33 / G43 / G45). Performance & Technology The EXPS3 HD retains the compact footprint of the EXPS3 and is powered by a CR123 battery. Thanks to updated electronics, it delivers a battery life of up to 1,000 hours, depending on brightness level and environmental conditions. • Side-mounted battery compartment for additional rail space • Parallax-free reticle for consistent point of impact • Side-mounted controls for optimal accessibility Mounting & Durability The integrated Quick-Release (QD) mount ensures repeatable mounting and raises the sight line by approx. 7 mm. The housing is made from hard-anodized aluminum and is fully sealed: • Waterproof up to approx. 10 m • Fog-resistant • Designed for demanding environments Technical Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Field of View Enhanced field of view due to new hoodless design Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount Night Vision Compatible Yes, compatible with all generations of night vision devices Water Resistance Submersible up to approx. 10 m Sealing Hermetically sealed, fog-resistant Housing Hard-anodized, matte black aluminum Brightness Levels (Night) 4 levels Brightness Levels (Day) 7 levels + automatic brightness setting Auto Function Shake-Awake activation Adjustment 0.5 MOA per click Adjustment Range ± 40 MOA Power Supply 1 × CR123 battery (pre-installed) Low Battery Indicator Warning for low remaining power Dimensions 89.9 × 56.6 × 50.8 mm Weight 330 g Note • Packaging is opened to record serial numbers • Battery is pre-installed from the factory • Light mounting marks may be visible due to manufacturer testing Pre-Order Pre-order now and secure yours! Get the new EOTECH EXPS3 HD and experience next-generation holographic performance.

The EOTECH 552 XR308 is a holographic reflex sight with integrated night vision (NV) capability, specifically designed for use with night vision devices. Such systems were originally reserved for law enforcement and military use. Some models are still restricted to the U.S. military today. However, the EOTECH 512, 552, XPS, and EXPS models are approved for the civilian market and offer proven military-grade technology. These holographic sights were primarily developed for fast target acquisition and precise shot placement – ideal for applications such as driven hunts. Special Reticle for .308 The 552 XR308 features a reticle specifically designed for .308 caliber applications. Unlike the standard circle-dot reticle, this model offers: • Crosshair-dot reticle • 3 additional holdover marks • Optimized for distances up to 1,200 m Features & Application Thanks to the large viewing window and slim housing, the sight allows for both-eyes-open shooting without restricting the field of view. The sight is ideal for: • Precision shooting at medium and long distances • Tactical applications • Hunting use Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Technical Data Reticle Crosshair-dot reticle with 3 holdover marks (600 / 900 / 1200 m) Dot Size 1 MOA Night Vision Capability Yes (IR levels available) Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels 30 levels (including 10 for night vision) Auto Shut-Off Automatic shut-off (programmable) Adjustment 1.25 cm per click at 100 m Adjustment Range ± 40 MOA Power Supply AA batteries (not included) Battery Life Up to 1000 hours (level 12), approx. 600 hours with alkaline batteries Low Battery Indicator Warning for low remaining power Dimensions approx. 131 × 49 × 60 mm Weight approx. 326 g Mount Picatinny mount Reticle Type Crosshair-dot Reticle Color Red Design Encased

The IEA HHS Kit is a high-performance complete solution consisting of the EOTECH XPS3-0, a Unity Tactical Absolute Riser, and the matching Unity Tactical FTC 4x Magnifier. Performance & Features This setup combines fast close-range target acquisition with the ability for precise target identification at medium distances. • EOTECH XPS3-0 Compact holographic sight with a parallax-free reticle and night vision compatibility • Unity Tactical Absolute Riser Raised mount for improved ergonomics and enhanced situational awareness • Unity Tactical FTC 4x Magnifier Flip-to-Center (FTC) magnifier for quick transitions between 1x and 4x magnification System Advantages • Fast transition between close and mid-range engagement • Optimized ergonomics and sight height • Durable construction for tactical applications • Perfectly matched, ready-to-use system Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is pre-installed from the factory • Light mounting marks may be visible due to manufacturer testing