EOTECH Cover – Durable Protection for Your Optic Our precisely fitting EOTECH covers are made from high-quality, durable rubber and provide optimal protection for your EOTECH XPS/EXPS as well as the G33 magnifier. The textured surface ensures easy installation and removal, even when wearing gloves or in wet conditions. Whether rain, snow, dirt, or scratches – this cover reliably protects your device without affecting its functionality. Ideal for professional use, hunting, or field training. Shock- and weather-resistant Quick installation and removal Suitable for EOTECH XPS/EXPS and G33

Reticle Illumination for Hensoldt Z24 Product Description Original reticle illumination unit for the Hensoldt Z24 riflescope, suitable for the G3 rifle and similar platforms. This is a genuine original part (no reproduction), designed for reliable operation and optimal reticle visibility in low-light conditions. Powered by a single 1.5V AA battery, the unit ensures simple and dependable use. Key Features Original Hensoldt component – no aftermarket reproduction Designed for Z24 riflescope (e.g. G3 platform) Improved reticle visibility in low-light environments Simple power supply: 1× 1.5V AA battery Condition New item Important Note Image may show additional accessories (e.g. riflescope), which are not included in the scope of delivery.

Military Tripods Carbon XS / TACT3 / STATIV 70 The German-made military tripods Carbon XS, TACT3, and STATIV 70 are now also available for civilian customers through IEA MIL-OPTICS in Nagold. These tripods have been used for years by numerous armed forces worldwide, including the German Bundeswehr and the US Army. All tripods are made from non-magnetic and non-magnetizable aluminum or carbon, ensuring reliability in sensitive environments. General Features Non-magnetic construction (aluminum or carbon) Height range: approx. 16–75 cm (depending on model) Ball adjustment for leveling on uneven terrain Detachable mast, usable as a monopod with ground spike Mounting plates with 1/2x20 or 3/8x16 threads Quick-release system allowing clamping in 4 directions TACT3-S Non-magnetic aluminum tripod with dual telescopic extension Mounting plates available in 1/4"x20 and 3/8"x16 Emergency function for devices with 1/4"x20 threads In case of failure of the pan/tilt head, it can be removed and the device can be mounted directly onto the mast. Target acquisition is then achieved via the ball adjustment. By removing the retaining nut at the bottom of the telescopic tube, the mast (with head) can be removed. The integrated ground spike can then be inserted, allowing use as a monopod. TACT3-SEL Same features as TACT3-S Additionally equipped with a fine vertical adjustment drive integrated into the pan/tilt head Technical Specifications Weight: 1415 g Packed size: 12.5 × 47 cm Operating height: 38 – 74.5 cm Key Features Overview Pan/tilt head Horizontal leveling adjustment Dual telescopic extension Non-magnetic construction Fine vertical adjustment (SEL version)

IEA Mounting Ring for KH/S or KH/F Mount Mounting ring for KH/S or KH/F mounting systems. Designed with STANAG profile Robust and precise construction ⚠ Note: Image may differ in height. The delivered version corresponds to the specified height.

Eyecup for Hensoldt Riflescopes Screw-on eyecup for mounting onto the eyepiece of Hensoldt riflescopes. Compatibility 3–12×56 4–16×56 6–24×72 ⚠ Important: Adapter ring for 3.5–26×56 is no longer available – therefore not compatible.

Protective Cover for Steiner ICS Custom-fit protective cover for the Steiner ICS 6×40, available in three variants (see images). Variants Neoprene Cover Custom-fit and padded Designed for safe storage and protection of the Steiner ICS Rubber Protective Cover Rubber Protective Cover Custom-fit with a secure hold Can remain mounted during use ⚠ Note: Images may show optional accessories (ICS device), which are not included in the scope of delivery.

Screw-On Sunshade for Hensoldt 6–24×72 Sunshade designed to be screwed onto the objective lens of the Hensoldt 6–24×72 riflescope. Reduces glare and stray light Improves image contrast Easy installation via screw-on mounting

Hybrid Cover for Terrapin X (Stone Grey / Olive, TRP-X BW) Custom-fit cover for the Terrapin X laser rangefinder, made from a robust and elastic material. Precise fit for secure hold Durable and flexible fabric Compact and easy to handle

Sonnenblende zum Aufschrauben auf Hensoldt Zielfernrohre mit 56er Objektiv.

IEA Mounting Ring for KH/S or KH/F Mount Mounting ring for KH/S or KH/F mounting systems. Designed with STANAG profile Robust and precise construction ⚠ Note: Image may differ in height. The delivered version corresponds to the specified height.

Table Tripod Complete with SWP TRP-X The SWP TRP-X is extremely compact—barely larger than a hand—featuring an integrated spirit level and a total weight of just 800 g including the tripod head. The tripod legs consist of five segments each, allowing a compact packed size of only 16 cm. When extended, it provides a working height from 16 to 42.5 cm. Features Ultra-compact and lightweight design 5-section legs for minimal pack size Working height: 16 – 42.5 cm Integrated spirit level Ideal for travel, outdoor use, and mobile applications Tripod Head The set includes a professional ball head: 360° rotation Adjustable and lockable with a single screw Additional Details Tripod legs can be adjusted upwards and downwards Reversible center column for flexible positioning Perfect for users who need a compact, stable, and portable solution without the bulk and weight of conventional tripods.

Unity Tactical FAST 4x Magnifier – Flip-to-Center Technology Product Description The Unity Tactical FAST 4x Magnifier combines 4x magnification with the innovative Flip-to-Center (FTC) technology. With an optical centerline height of 2.26" (5.74 cm), it enables fast target acquisition and an ergonomic shooting posture. It is ideal for tactical applications, sport shooting, and hunting. The rugged construction and high-quality optics ensure clear vision and reliable performance, even under extreme conditions. Key Features 4x magnification: Clear and detailed view of distant targets, even in low-light conditions Flip-to-Center (FTC) technology: Simple force-to-overcome mechanism for fast deployment and stowing without obstructing the field of view Ergonomic height: 2.26" promotes a natural head position and reduces neck strain Robust construction: High-strength aluminum with weather-resistant coating for maximum durability Quick detach system: Integrated QD lever for tool-free mounting and removal Technical Specifications Performance Magnification: 4x Optical centerline height: 2.26" (5.74 cm) Field of view @ 100 yards: 30.1 ft (9.2 m) Eye relief: 2.6" (67 mm) Dimensions & Weight Dimensions (W x L x H): 7.1 cm x 10.7 cm (with QD) x 8.1 cm (raised) 5.1 cm (folded) Weight: < 12.5 oz (< 354.4 g) Build & Mounting Material: 7075-T6 aluminum, Type III hard anodized Color options: Black or FDE Mounting: M1913 Picatinny rail with integrated QD mount Scope of Delivery FAST 4x Magnifier

Angle Cosine Indicator with 34 mm Ring and Bubble Level

IEA Mounting Ring for KH/S or KH/F Mount Mounting ring for KH/S or KH/F mounting systems. Designed with STANAG profile Robust and precise construction ⚠ Note: Image may differ in height. The delivered version corresponds to the specified height.

IEA 45° Offset Mount for EFLX / Leupold DeltaPoint Our new IEA 45° offset mount is designed for mounting red dot sights on the LCM (Lightweight Combat Mount). With this system, all red dots featuring the EOTech EFLX or Leupold DeltaPoint footprint can be mounted directly onto the LCM. Advantages Conventional offset mounts are typically attached to the Picatinny rail, which often leads to conflicts with other attachments such as riflescopes, clip-on devices, laser modules, or cable switches. The IEA 45° offset mount eliminates these issues by integrating directly into the mount system. Features Compatible with EOTech EFLX / Leupold DeltaPoint footprint Mountable in multiple positions: Front or rear (below the rings) Left or right side Standard (red dot facing up) or upside down (red dot facing down) Ensures a clear sight picture in all configurations Ergonomically optimized while remaining close to the riflescope Features a STANAG profile for mounting adapter plates or Picatinny rails Additional Information Available in black and tan ⚠ Note: Images may show optional accessories, which are not included in the scope of delivery.

Picatinny Rail for STANAG Mounts (KH/F – G3 / MP5) Picatinny rail for mounts with STANAG profile. Compatible with systems such as the IEA KH/F mount and Heckler & Koch G3 / MP5 clamp mounts (please specify when ordering – suitable screws will be included). Features Precision-machined from TS7075 aluminum High-quality construction Black anodized finish

Polarizing Filter for Hensoldt 3.5–26×56 Polarizing filter designed for the Hensoldt 3.5–26×56 riflescope. Features Enables clear vision through glass surfaces Reduces reflections and glare Improves image clarity and contrast

Laser Protection Filter for Hensoldt Riflescopes Laser protection filter designed to be screwed into the eyepiece of Hensoldt riflescopes. Compatibility For Hensoldt 3.5–26×56, the adapter ring ZB000045 is required

Gelbfilter für Hensoldt Zielfernrohre. Gelbfilter erhöhen die Kontrastverhältnisse bei schlechten Sichtbedingungen.  

Offset Spacer for IEA KH/F and KH/S Mounts (70 mm) The new offset spacer for IEA KH/F and KH/S mounts allows shifting optics approx. 70 mm forward. Features Moves optics ~70 mm forward Ideal for AR-15 platforms to improve eye relief without repositioning the base mount onto the handguard Compatible with all IEA rings, inclination plates, and base plates (KH/S & KH/F) thanks to STANAG profile Made from high-strength TS7075 aluminum Scope of Delivery Offset spacer Screw set (to be shortened to fit) ⚠ Important: Only the spacer is included – mounts and rings shown in images are not part of the delivery Images may show optional accessories

Protective Cover for Riflescope with Carrying System (Flecktarn) Internal usable length: approx. 40 cm ⚠ Note: Images show the cover mounted. Accessories are not included in the scope of delivery.

With the new KH/S Skeleton Mount, the proven IEA mounting technology has been visually modernized while also reducing overall weight. All established features such as the side support system and the wide range of configuration and adjustment options remain fully retained. The new base plate continues to be compatible with all inclination plates and ring configurations. Features of the IEA-KH/S (Support) • Inclination plates available for: 10 MOA 20 MOA 25 MOA 30 MOA 35 MOA Custom angles upon request • Side support adjustment of the inclination plate for optimal utilization of the riflescope’s windage adjustment range • Ability to change inclination angles simply by replacing the inclination plate • Ability to switch between ring diameters by replacing the rings • Height adjustment using spacers without removing the rings attached to the riflescope Optical Height Above Picatinny Rail The optical height is calculated as: Base + Inclination + Spacer + Ring Base Height + Half Ring Diameter Standardized Optical Center Heights • US systems/weapons: 39 mm • NSV 80/1000: 48 mm • NSV 600: 33 mm • IRV 600/900: 30 mm Features of the IEA-KH/F • One-piece machined mounting base for maximum rigidity • High-strength materials designed for professional continuous-duty use • Fast attachment and removal with exceptional repeatability • STANAG 2324 interface for direct attachment of optical devices with STANAG interface • Spacers for height adjustment when using additional devices such as NSV systems • Quick-detach lever with adjustment capability to compensate for Picatinny rail tolerances Optical Height Above Picatinny Rail Base + Inclination + Spacer + Ring Base Height + Half Ring Diameter Standardized Optical Center Heights • US systems/weapons: 39 mm • NSV 80/1000: 48 mm • NSV 600: 33 mm • IRV 600/900: 30 mm KH-F D25.4 ModelDiameter1/2 DRing HeightBase HeightTotal HeightKH-F 25.4/625.4 mm12.7 mm6 mm9.2 mm27.9 mmKH-F 25.4/7.325.4 mm12.7 mm7.3 mm9.2 mm29.2 mmKH-F 25.4/1025.4 mm12.7 mm10 mm9.2 mm31.9 mmKH-F 25.4/1525.4 mm12.7 mm15 mm9.2 mm36.9 mm KH-F D30 ModelDiameter1/2 DRing HeightBase HeightTotal HeightKH-F 30/630 mm15 mm6 mm9.2 mm30.2 mmKH-F 30/7.330 mm15 mm7.3 mm9.2 mm31.5 mmKH-F 30/1030 mm15 mm10 mm9.2 mm34.2 mmKH-F 30/1530 mm15 mm15 mm9.2 mm39.2 mm KH-F D34 ModelDiameter1/2 DRing HeightBase HeightTotal HeightKH-F 34/634 mm17 mm6 mm9.2 mm32.2 mmKH-F 34/7.334 mm17 mm7.3 mm9.2 mm33.5 mmKH-F 34/1034 mm17 mm10 mm9.2 mm36.5 mmKH-F 34/1534 mm17 mm15 mm9.2 mm41.2 mm

Eigenschaften IEA-KH/S (Support) -          Winkelplatte zur Erzielung eines Vorneigungswinkel von 10, 20, 25, 30, 35 MOA bzw. Sondermaßen -          Supportverstellung der Winkelplatte zur optimalen Ausnutzung der Seitenverstellung des ZF -          Umrüstoption auf verschiedene Vorneigungswinkel nur durch Austausch der Winkelplatte -          Umrüstoption auf verschiedene Ringdurchmesser nur durch Austausch der Ringe -          Bauhöhenanpassung mittels Spacer ohne Demontage der am ZF befestigten Ringe Optische Höhr über Pic. Schiene ergibt sich aus:  Basis + Vorneigung + Spacer + Sockelhöhe + halber Ringdurchmesser Standardisiertes Achsmaß für US Geräte/Waffen - 39mm; NSV 80/1000 - 48mm; NSV 600 - 33mm; IRV 600/900 - 30mm Eigenschaften IEA-KH/F -            Montagebasis aus einem Stück gefräßt für optimale Steifigkeit -          Hochfeste Werkstoffe für den Einsatz im professionellen Dauergebrauch -          Schnelle Auf- und Abnahme bei höchster Wiederholgenauigkeit -          Basisschnittstelle nach Stanag 2324 zur direkten Befestigung von optischen Geräten mit Stanag-Aufnahme -          Spacer (Zwischeneinlagen) zur Anpassung der Bauhöhen für Zusatzgeräte wie NSV etc. Schnellspannhebel mit Nachstelloption zur Anpassung an Picatinny-Schienen mit Maßtoleranzen  Optische Höhe über Pic. Schiene ergibt sich aus: Basis + Vorneigung + Spacer + Sockelhöhe + halber Ringdurchmesser  Standardisiertes Achsmaß für US Geräte/Waffen - 39m; NSV 80/1000 - 48mm; NSV 600 - 33mm; IRV 600/900 - 30mm KH-F D25,4               Durchmesser 1/2 D Ringhöhe (Sockel) Basishöhe   Gesamthöhe     25,4 12,7 6 9,2   27,9 Picatinnymontage KH-F 25,4/6 25,4 12,7 7,3 9,2   29,2 Picatinnymontage KH-F 25,4/7,3 25,4 12,7 10 9,2   31,9 Picatinnymontage KH-F 25,4/10 25,4 12,7 15 9,2   36,9 Picatinnymontage KH-F 25,4/15                 KH-F D30               Durchmesser 1/2 D Ringhöhe (Sockel) Basishöhe   Gesamthöhe     30 15 6 9,2   30,2 Picatinnymontage KH-F 30/6 30 15 7,3 9,2   31,5 Picatinnymontage KH-F 30/7,3 30 15 10 9,2   34,2 Picatinnymontage KH-F 30/10 30 15 15 9,2   39,2 Picatinnymontage KH-F 30/15                 KH-F D34               Durchmesser 1/2 D Ringhöhe (Sockel) Basishöhe   Gesamthöhe     34 17 6 9,2   32,2 Picatinnymontage KH-F 34/6 34 17 7,3 9,2   33,5 Picatinnymontage KH-F 34/7,3 34 17 10 9,2   36,5 Picatinnymontage KH-F 34/10 34 17 15 9,2   41,2 Picatinnymontage KH-F 34/15