PVS-31 Housing Commercial KIT

Night Tronic 910 / PVS-7 – Classic Biocular Night Vision Goggles (4G Version) The Night Tronic 910 / PVS-7 is a classic among professional night vision goggles. As a biocular system, it is designed for fatigue-free observation and can be used with a head or helmet mount as driver goggles. Interchangeable objective lenses allow the device to be used as a night vision binocular. Technical Specifications – NT910 / PVS-7 Magnification: 1x (optional 3x / 5x) Aperture: f/1.2 Weight: 680 g IR Illuminator: up to 10 m Battery: 2x AA Generation: Gen 2+ or Gen 3 NT910 in 4G Version The NT910 4G is a device designed for government use, meeting all MIL-SPEC requirements and even exceeding the Delta version in terms of performance and image defects. The tubes used benefit from advanced technology, providing: Higher image quality Improved light amplification (gain) This results in a: Very bright image Very stable (low-noise) image —even under extremely poor lighting conditions. Tube Technology & Performance The Delta tubes used offer the following typical performance values: Signal-to-Noise Ratio (S/N): from 28, in some cases exceeding 30 FOM: typically around 2,000 Peak values: up to 2,400 FOM possible These tubes are: Comparable in performance to US Gen3 tubes While also being shock-resistant up to 500 G For comparison: A MIL-SPEC XR5 tube typically achieves 23 – 26 S/N Onyx Option Devices equipped with an Onyx tube provide: A more natural image A more stable (calmer) image Key Advantages Biocular system for fatigue-free vision Suitable as driver goggles (with head/helmet mount) Flexible use with interchangeable lenses (3x / 5x) Top-tier performance within the Gen2+ segment (4G technology) Optimized for government and professional applications Delivery Time Notice Delivery times for night vision devices may vary due to the current situation and are therefore non-binding.

The EOTECH HHS Kit consists of an EXPS3-4 (black) and a G33 magnifier (black). EXPS3-4 Holographic Sight The EXPS3 is one of the most compact and user-friendly models in the Holosight series. It is smaller and lighter than previous models and operates with a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. The reticle is parallax-free, allowing for fast and precise target acquisition. The integrated Quick-Release (QD) mount is repeatable and raises the sight line by approx. 7 mm. Optimized Design Compared to the XPS3-0, the controls have been moved to the side, allowing magnifiers such as the G30 / G33 / G43 / G45 to be mounted directly behind the sight. • Required rail space: only 67 mm • Ideal for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications – EXPS3-4 Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 4 × 1 MOA dots (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount Night Vision Compatible Yes Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 10 levels for night vision devices Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 91 × 60 × 71 mm Weight 317 g Reticle Variants Note The EXPS3 series is available with different reticle options: -0, -2, or -4 depending on the number of holdover points. EOTECH G33 Magnifier (3x) Performance & Features The EOTECH G33 Magnifier is the preferred choice of USSOCOM and the German KSK. The Flip-to-Side (STS) mount allows for a fast transition from 3x magnification to 1x, ideal for dynamic shooting scenarios. • Tool-free vertical and horizontal adjustments • Precise alignment of the reticle to the center of the image • Wide field of view • Adjustable diopter for sharp focus The G33 is compatible with all EOTECH HWS models. Specifications – G33 Magnification 3x Eye Relief 56 mm Field of View 7.3° Optical Axis Height 39 mm (46 mm with included 7 mm riser) STS (Flip-to-Side) Yes Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Housing Hard-anodized, matte black aluminum Length 99 mm Weight 350 g Mount QD lever, Picatinny rail Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

  Der RAILINK Switch MPLS ist eine IR-Richtungsbeleuchtungslösung für kurze Reichweiten, die mit dem RAILINK-Strom- und Daten-ARC-Schienen-System arbeitet. Mit einem Gewicht von nur 13 Gramm und einem benutzerfreundlichen, handschuhfreundlichen Schalter bietet er dem Endbenutzer eine ausfallsichere Beleuchtungslösung für alle Bedürfnisse bei niedrigem Licht und IR-Beleuchtung. Hauptmerkmale: IR-Richtungsbeleuchtung: Entwickelt für spezifische Beleuchtungsanforderungen in Umgebungen mit wenig Licht und im Infrarotbereich. Leichtgewicht: Mit nur 13 Gramm ist der RAILINK Switch MPLS extrem leicht und belastet den Benutzer kaum. Benutzerfreundlicher Schalter: Der handschuhfreundliche Schalter ermöglicht eine einfache Bedienung auch unter schwierigen Bedingungen. Integration mit RAILINK: Funktioniert nahtlos mit dem RAILINK-Strom- und Daten-ARC-Schienen-System, was eine zuverlässige und effiziente Nutzung sicherstellt. Ausfallsichere Beleuchtungslösung: Bietet dem Benutzer eine zuverlässige Beleuchtungslösung, die in kritischen Situationen funktioniert. Diese Merkmale machen den RAILINK Switch MPLS zu einer idealen Wahl für taktische und operationelle Szenarien, in denen eine zuverlässige und effiziente Beleuchtung erforderlich ist.

The IEA HHS Kit consists of the EOTECH 512.A65 holographic sight combined with the compact G43 magnifier, offering a versatile solution for both close-range and mid-range applications. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is pre-installed from the factory • Light mounting marks may be visible due to manufacturer testing

ITT ANVIS 6/9 Ball Detent Mount – Refurbished Die ITT ANVIS 6/9 Ball Detent Mount ist eine generalüberholte Original-Helmhalterung für ANVIS‑6/9 Nachtsichtbrillen. Die bewährte Ball-Detent-Schnittstelle sorgt für einen sicheren, spielfreien Sitz am Helm und ermöglicht das schnelle An- und Abklappen der ANVIS-Goggles – die kosteneffiziente Lösung als Ersatz- oder Upgrade-Mount für vorhandene ANVIS-Setups. Es handelt sich um reparierte Gebrauchtware in gutem Zustand. Äußerer Zustand kann leicht vom angepriesenen Bild abweichen.  Lieferumfang:1x ANVIS Ball Detent Mount

The EOTECH Vudu 3.5–18x50 delivers sharp and high-contrast images in all lighting conditions, making it ideal for applications ranging from medium to long distances. Performance & Features The riflescope is equipped with a side-mounted parallax adjustment, allowing precise focus at varying distances. The elevation turret features a push/pull locking system along with EOTECH’s proven EZ Chek Zero Stop, enabling fast and reliable return to zero. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • Light mounting marks may be visible due to manufacturer testing Specifications Color Black Scope of Delivery 1× battery, bikini lens covers, throw lever, riflescope Power Supply Approx. 500 hours battery life at medium brightness Automatic sleep mode after 2 hours CR2032 battery Electronics Illuminated reticle (red), adjustable via push buttons Focal Plane FFP (First Focal Plane): MD1 (MRAD), MD2 (MOA), H59 (MRAD) SFP (Second Focal Plane): HC1 (MOA) Elevation Adjustment ± 14.5 MRAD or ± 50 MOA Windage Adjustment ± 14.5 MRAD or ± 50 MOA Eye Relief 92–94 mm Objective Lens Diameter 50 mm Weight 942 g Tube Diameter 34 mm Magnification 3.5–18x (continuous) Overall Length 377 mm Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.