Ops-Core RAC Headset Helmet Rail Mount AMP

Night Tronic 910 / PVS-7 – Classic Biocular Night Vision Goggles (Special Offer) The Night Tronic 910 / PVS-7 is a classic among professional night vision goggles. As a biocular system, it is designed for fatigue-free observation and, when used with a head or helmet mount, can also function as driver goggles. Interchangeable objective lenses allow the device to be used as a night vision binocular. Special Offer (Limited Availability) Currently available at a special price and in limited quantities only. The devices vary in performance: From 16 S/N with few blemishes Up to 22.5 S/N with more blemishes (as shown, see last image) Technical Specifications – NT910 / PVS-7 Magnification: 1x (optional 3x / 5x) Aperture: f/1.2 Weight: 680 g IR Illuminator: up to 10 m Battery: 2x AA Generation: Gen 2+ or Gen 3 NT910 in Alpha Version This version has been specifically designed for hunting and non-governmental applications and is manufactured on our behalf. The installed tubes offer a very good price-performance ratio and represent an entry-level solution into the NT910 class. Tube Technology The device uses classic Generation 2+ Photonis tubes with the following performance characteristics: Signal-to-Noise Ratio: approx. 20 S/N Resolution: approx. 60 – 65 lp/mm The NT910 Alpha therefore provides a solid baseline setup for hunters. With an additional infrared illuminator, the device is also well-suited for extreme low-light conditions. Key Advantages Biocular system for fatigue-free vision Suitable as driver goggles (with head/helmet mount) Flexible use with interchangeable lenses (3x / 5x) Very good entry-level price-performance ratio Optimized for hunting applications Delivery Time Notice Delivery times for night vision devices may vary due to the current situation and are therefore non-binding.

The holographic EOTECH XPS sights are the successors to the 511 / 551 models. They are significantly more compact than the 5-series and require only 67 mm of rail space for mounting. They are powered by a single CR123 lithium battery, offering a battery life of up to 600 hours at brightness level 12 under normal temperature conditions. The XPS2-2 features a fixed mount. If you are looking for a version with a quick-detach mount (QD), the corresponding model is the EXPS2. Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring Outer ring with 65 MOA diameter (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot 2 × 1 MOA dots (approx. 3 cm at 100 m) – among the smallest available aiming points Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount / fixed mount Night Vision Compatible No Water Resistance Submersible up to approx. 3 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 96.5 × 53.3 × 63.5 mm Weight 255 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item becomes available, you will be automatically notified.

NEW 2026 – Fully Enclosed Mini Reflex Sight (Closed Emitter) The EOTECH EFLX CE™ is the latest fully enclosed mini reflex sight (closed emitter design) from EOTECH, specifically developed for professional users. It combines EOTECH’s proven reliability with maximum resistance to dirt, moisture, and impact. The rugged 7075 aircraft-grade aluminum housing fully protects the LED between two independent lenses and features a square viewing window for fast target acquisition, including an integrated backup sighting reference. With a weight of only approx. 1.46 oz (41.4 g) and extremely compact dimensions, it is ideal for pistols, PDWs, SBRs, and as a backup sight on rifles. Performance & Features The Shake-Awake™ system automatically activates the sight upon movement, conserving battery life, while programmable sleep modes further extend runtime. Users can select between multiple reticle options: • 3 MOA dot for precision • 42 MOA ring for rapid acquisition • Ring + Dot combination (multi-reticle system) The red illumination offers: • 6 daylight brightness settings (including ultra-bright) • 2 night vision settings (NV-compatible) Large, recessed, rubberized top-mounted buttons ensure intuitive operation—even with gloves—without interference from side or bottom controls. Durability & Power A side-loading CR2032 battery provides an impressive runtime of up to 25,000 hours (at medium brightness, dot only) and can be replaced without removing the sight. The optic is fully waterproof, shockproof, and fog-resistant, designed for reliable operation in extreme environments. Mounting Compatibility The sight mounts directly to: • Leupold DeltaPoint Pro (DPP) footprint • Shield RMS-c footprint Technical Specifications Magnification 1× Reticle Selectable: 3 MOA dot / 42 MOA ring / ring + dot Reticle Color Red illuminated Illumination LED, 6 daylight levels + 2 NV levels, Shake-Awake™ activation Controls Large rubberized top buttons (power, brightness, reticle selection) Adjustment 1 MOA per click (windage & elevation), tool-adjustable Housing Material 7075 aluminum (Type III hard anodized), fully enclosed closed-emitter design Dimensions (L × W × H) Approx. 1.6" × 1.2" × 1.1" (40.5 × 30.5 × 28 mm) Weight Approx. 1.46 oz (41.4 g) including battery Power Supply 1× CR2032 (side access, replaceable without removal), up to 25,000 hours Mounting Footprint Leupold DeltaPoint Pro (DPP) / Shield RMS-c Environmental Protection Waterproof, shockproof, dust- and debris-resistant (closed emitter) Availability New for 2026, expected April Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is pre-installed from the factory • Light mounting marks may be visible due to manufacturer testing

The EOTECH EXPS2 is one of the most compact and user-friendly models in the Holosight series. It is smaller and lighter than previous models and operates with a single CR123 battery. Thanks to the optimized battery configuration, more space is available on the Picatinny rail than ever before. Battery life is approximately 600 hours. Key Features • Parallax-free reticle for precise targeting • Integrated Quick-Release mount (QD) • Repeatable zero • Compatible with Picatinny and Weaver rails • Raises the sight line by approx. 7 mm Optimized Design Compared to the XPS models, the controls have been moved to the side. This allows EOTECH magnifiers (G30 / G33 / G43 / G45) to be mounted directly behind the sight. • Required rail space: only 67 mm • Optimized for modern setups with magnifiers Important Notes on Our EOTECH Products • Packaging is opened in advance to record serial numbers • The battery is already installed from the factory • Light mounting marks may be visible due to manufacturer testing Specifications Reticle / Speed Ring 65 MOA outer ring (approx. 30 cm at 50 m) for fast target acquisition Reticle / Dot Depending on selection: 1x, 2x or 4x 1 MOA dot (approx. 3 cm at 100 m) Reticle Type Circle-Dot Reticle Color Red Mount Picatinny mount (integrated QD mount) Night Vision Option No Water Resistance Submersible up to approx. 10 m Sealing Fog-resistant, hermetically sealed Protection Protective hood made of hard-anodized, matte black aluminum Brightness Levels (Night) 0 Brightness Levels (Day) 20 brightness levels Auto Shut-Off Automatic shut-off (programmable) Adjustment 0.5 MOA per click at 100 m Adjustment Range ± 40 MOA Power Supply CR123 battery (not included) Low Battery Indicator Warning for low remaining power Dimensions 91 × 60 × 71 mm Weight 317 g Pre-Order Item currently not available? Pre-ordering is worth it! With your pre-order, you will automatically be added to our waiting list. As soon as the item is available, you will be automatically notified.

UNITY TACTICAL GASCAP™ Featuring LINK™ System Technology, the GASCAP™ USB-C Tailcap represents a paradigm shift in switching technology, bringing USB-C capability to weapon-mounted lights and remote switches. The robust performance of the LINK™ system interface delivers near lossless output along with reliable and repeatable activation. The side-mounted and reversible interface of the GASCAP™ allows for a wide variety of mounting and cable management options, while its integrated protective cage safeguards the cable and ensures a secure connection. The GASCAP™ also features an integrated full-size activation button for both momentary and constant-on operation of your device. Constructed from high-impact polymer, the GASCAP™ is designed to withstand even the harshest operational environments. Currently available for SureFire® Scout®-style weapon lights, the GASCAP™ is compatible with UNITY’s AXON™, AXON™ SL, and ModButton™ Lite switch systems. Compatibility • LINK™ USB-C System • Compatible with LINK™ variants of: AXON™ AXON™ SL ModButton™ Lite Interface • Compatible with SureFire® Scout®-style weapon lights Material • High-impact polymer Weight • Less than 0.6 oz • Less than 17 g Dimensions (W x H) • Less than 1.0 x 1.4 in • Less than 0.4 x 3.5 cm Colors • Black • FDE (Flat Dark Earth) Included • One (1) GASCAP™ • One (1) GASCAP™ Cage Top Clip • One (1) GASCAP™ Cage Bottom Clip • One (1) GASCAP™ Dust Cover

What are SMARTSHOOTER fire control systems used for? An abstract and concrete threat posed by drones has become increasingly widespread worldwide. Military forces and law enforcement agencies, including state and federal police, are facing this ongoing threat more frequently. Reports from various operations indicate that, for example, German Bundeswehr camps in Afghanistan and Mali were almost daily overflown by small Unmanned Aerial Systems (sUAS), likely for reconnaissance purposes. However, it cannot be ruled out that Unmanned Aerial Vehicles (UAVs) may also carry payloads capable of conducting attacks. With the increasing proliferation of sUAS, counter-sUAS (C-sUAS) capabilities and technologies are becoming more important than ever. This applies not only to international deployments but also to the protection of domestic infrastructure. The challenges posed by sUAS are diverse. Most drones are civilian products that are widely available and often inexpensive, making them accessible to almost anyone. They are typically small in size and made of plastic, resulting in a low signature that is difficult to detect or track. In addition, they offer relatively high speeds and a high level of agility. Commercially available yet powerful systems can be acquired at low cost and often include simple flight control, built-in planning and navigation systems, long flight times, and high-definition camera technology. To counter these new and rapidly evolving threats, SMARTSHOOTER specializes in developing advanced fire control systems for small arms that significantly increase accuracy and hit probability against both static and moving targets on the ground and in the air, day and night. SMASH HOPPER The SMASH HOPPER is a lightweight Remote Controlled Weapon Station (RCWS) equipped with SMASH fire control technology. It enables operators to remotely engage ground targets and small Unmanned Aerial Systems (UAS). The combination of low weight and compact size makes the SMASH HOPPER a complete system, ideally suited for complex urban environments, border areas, and the protection of critical infrastructure, as well as situations where a low signature is required. The HOPPER can be mounted in various configurations, including on a tripod, fixed mast, naval vessels, or vehicles. The SMASH fire control tracking and locking capability allows the system to maintain target lock while maneuvering on land or at sea. The SMASH HOPPER can also be integrated into existing Command-and-Control (C2) systems, enabling operators to transmit or receive targets via established communication networks.